Lei Wang, Masayuki Okugawa*, Yuheng Liu, Ken Cho, Yuichiro Koizumi*, Hiroyuki Y. Yasuda and Takayoshi Nakano:
Microstructural Evolution and Wear Resistance Enhancement of Electron-Beam-Fabricated Nickel Titanium Coatings on Titanium by Heat Treatment,
Materials Transactions, 67 (2026) 771-782.

DOI: https://doi.org/10.2320/matertrans.MT-M2025170

論文はこちら
PDFはこちら

Yong Seong Kim, Ozkan Gokcekaya, Ryosuke Ozasa, Takayoshi Nakano:
In situ Alloyed Refractory High Entropy Alloy by Laser Powder Bed Fusion, Materials Science Forum, 1175 (2026) 105-110.

DOI: 10.4028/p-0OnKo3

論文はこちら
PDFはこちら

Kippei Yamashita, Ken Cho, Takuma Saito, Taisuke Sasaki, Katsuhiko Sawaizumi, Masayuki Okugawa, Yuichiro Koizumi, Takayoshi Nakano, Hiroyuki Y. Yasuda:
Influence of Hierarchical Structure on Mechanical Properties of Additive Manufactured IN718 Alloys, Materials Science Forum, 1175 (2026) 129-134.

DOI: 10.4028/p-1DlHhB

Masayuki Okugawa*, Yuya Furushiro, Seori Motoyama, Yuheng Liu, Takayoshi Nakano, Yuichiro Koizumi: Manuscript number Integrated computational and experimental study on rapid heating and cooling in powder-bed fusion of Al-Si hypoeutectic alloys, Materials Transactions, (2026), in press.

DOI:https://doi.org/10.2320/matertrans.MT-M2025132

Masataka Mizuno*, Masaki Otsuka, Kazuhisa Sato, Takuya Ishimoto, Takayoshi Nakano, Hideki Araki: Identification of lattice defects in laser powder bed fusion-fabricated 316L stainless steel by positron annihilation spectroscopy, Journal of Materials Research and Technology, in press, 40, (2026), 188-193.

DOI: https://doi.org/10.1016/j.jmrt.2025.12.147

論文はこちら
PDFはこちら

Chika Nakadozono,Hao Liu,Marcy Zenobi-Wong,Michiya Matsusaki
Fabrication of aligned adipose tissues using the FLight method for cultured meat applications
MRS Communications(Dec 12, 2025)

DOI:https://doi.org/10.1557/s43579-025-00908-5

論文はこちら
PDFはこちら

Masataka Mizuno, Ryosuke Takahagi, Ryosuke Ozasa, Takayoshi Nakano, Hideki Araki:
Investigation of lattice defects in β-type Ti-Cr alloys fabricated via laser powder bed fusion using positron annihilation spectroscopy and first-principles calculations, Journal of Physics: Conference Series, 3149, (2025), 012010.

DOI: https://iopscience.iop.org/article/10.1088/1742-6596/3149/1/012010

論文はこちら
PDFはこちら

Ken Cho, Kippei Yamashita, Shinnosuke Kakutani, Takuma Saito, Taisuke Sasaki, Katsuhiko Sawaizumi, Masayuki Okugawa, Yuichiro Koizumi, Tsuyoshi Mayama, Taichi Kikukawa, Ozkan Gokcekaya, Takuya Ishimoto, Hajime Kimizuka, Wu Gong, Takuro Kawasaki, Stefanus Harjo, Takayoshi Nakano, Hiroyuki Y. Yasuda*: Effect of nanoscale cellular structure on the mechanical properties of Inconel 718 with unique hierarchical structure fabricated by laser powder bed fusion, Acta Materialia.

DOI: https://doi.org/10.1016/j.actamat.2025.121696

論文はこちら

Sung-Hyun Park, Fatmanur Ayten, Asli Gunay Bulutsuz, Ozkan Gokcekaya*, Muhammed Enes İlgazi, Hakan Yilmazer, Burak Dikici, Takayoshi Nakano*:
Wear and corrosion performance of textured Hastelloy-X fabricated by laser powder bed fusion: Process window and microstructural features, Journal of Materials Research and Technology, 39, (2025), 6156-6168.

DOI: https://doi.org/10.1016/j.jmrt.2025.10.229

論文はこちら
PDFはこちら

Itsuki Miyaguni, Kenta Homma,Michiya Matsusaki, Incorporation of Visible Light-Responsive Push Pull Azobenzene into Polymer Networks toward the Construction of Photodynamic Hydrogel Scaffolds, ACS Macro Letter, accepted (Sep 4, 2025).

DOI:https://pubs.acs.org/doi/full/10.1021/acsmacrolett.5c00549

論文はこちら
PDFはこちら

宮澤啓太郎、小笹良輔、内芝旭祥、清水佑太、中野貴由：L-PBF で造形した準安定β型Ti合金におけるヤング率の変化、 スマートプロセス学会誌、14[5], (2025), pp.258-263.

小笹良輔、Kim Yong Seong、朝倉光平、堀尾尚平、鰐渕良祐、中野貴由：金属3Dプリンタ用レーザ照射による非等量Ti-Nb-Mo-Ta-W系ハイエントロピー合金の組織形成挙動、 スマートプロセス学会誌、14[5], (2025), pp.253-257.

松坂匡晃、小坂朋生、山野大陸、船奥和真、劉甜、松垣あいら、中野貴由：生体用AMインプラント材料の抗菌特性評価のためのin vitro 共培養モデルの構築、 スマートプロセス学会誌、14[5], (2025), pp.249-252.

Takuya Sugiura, Kazumasa Nodake, Akiko Takasuga, Miki Mizukami, Koji Nakade, Tetsusei Kurashiki, Michiya Matsusaki:
Toward cultivated meat production: Biocompatibility analysis of propylene glycol-based cryopreservation solution solely prepared using food and food additives,Food Science and Technology Research,469(2025)

DOI:https://doi.org/10.3136/fstr.FSTR-D-25-00023

Lei Wang, Masayuki Okugawa, Yuheng Liu , Ken Cho, Hiroyuki Y. Yasuda, Takayoshi Nakano, Yuichiro Koizumi:
NiTi coating formation on Ti for enhanced wear resistance utilizing electron-beam additive manufacturing technique,
Surfaces and Interfaces, 72, (2025), 107024; 1-14.
DOI: https://doi.org/10.1016/j.surfin.2025.107024

論文はこちら
PDFはこちら

Yifan Zhao,Hao Ge,Yoshifumi Kondo,Zhenpeng Guo,Yasutaka Kuwahara,Kohsuke Mori,Tohru Sekino,Zhenfeng Bian,Hiromi Yamashita:
Highly Reactive Facet Modulation of Ti-Based MOFs by Selective Anchoring of Au Metal for Photocatalytic H2O2 Production,
ACS Catalysis, 15, (2025), 11313–11325.

DOI:https://pubs.acs.org/doi/10.1021/acscatal.5c01286

論文はこちら
PDFはこちら

Parinaz Mofazali, Masoud Atapour*, Ozkan Gokcekaya, Sung-Hyun. Park, Batur Ercan, Takayoshi Nakano: Comparison and Evolution of Ti6Al4V Bioalloy Fabricated by Laser and Electron beam Additive Manufacturing: Mechanical Features and Anisotropic Electrochemical Properties,
Materials Today Communications, (2025), 113124: 1-14.
DOI: https://doi.org/10.1016/j.mtcomm.2025.113124

論文はこちら

Taichi Kikukawa, Takuya Ishimoto*, Hyoung Seop Kim, Takayoshi Nakano*:
Remarkable Strengthening Effects of Cells in Laser Powder Bed Fusion Processed Inconel 718,
Materials Research Letters, (2025).
DOI: https://doi.org/10.1080/21663831.2025.2522801

プレリリースはこちら
論文はこちら
PDFはこちら

Kenta Homma, Yoshihisa Matsumoto, Yasushi Tanimoto, Kyoko Masui, Chie Hosokawa, Takashige Omatsu, Michiya Matsusaki:
Fabrication of Biocompatible Helical Fibers Using an Optical Vortex Beam,
Chemistry: An Asian Journal,e00361(2025)

DOI: https://aces.onlinelibrary.wiley.com/doi/10.1002/asia.202500361

論文はこちら
PDFはこちら

Masayuki Okugawa, Madoka Watanabe, Satoshi Ichikawa, Kazuhisa Sato, Yuheng Liu, Hiroyuki Y. Yasuda, Yuichiro Koizumi:

Impacts of excess vacancies on order-domain growth in D03 Fe3Al intermetallic phase,

Scripta Materialia, Vol.267, 1 October 2025, 116812

DOI:https://doi.org/10.1016/j.scriptamat.2025.116812