論文

Enhancement of plastic anisotropy and drastic increase in yield stress of Mg-Li single crystals by Al-addition followed by quenching

K. Hagihara K. Mori T. Nakano
Enhancement of plastic anisotropy and drastic increase in yield stress of Mg-Li single crystals by Al-addition followed by quenching
Scripta Materialia, 172, (2019), pp 93-97
dx.doi.org/10.1016/j.scriptamat.2019.07.012

論文

Development of non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials

T. Hori, T. Nagase, M. Todai, A. Matsugaki, T. Nakano,
Development of non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials
Scripta Materialia, 172(2019), pp.83-87
dx.doi.org/10.1016/j.scriptamat.2019.07.011

論文

Crystallographic Texture Formation of Pure Tantalum by Selective Laser Melting Method

O.J. Yeong T. Ishimoto S.-H. Sun T. Nakano
Crystallographic Texture Formation of Pure Tantalum by Selective Laser Melting Method
スマートプロセス学会誌、8 [4] 、「Additive Manufacturingプロセスが切り開く革新的ハードマテリアルの開発（2）」、(2019)、pp.151-154
dx.doi.org/10.7791/jspmee.8.151

論文

Effects of Heat Treatment on Unique Layered Microstructure and Tensile Properties of TiAl Fabricated by Electron Beam Melting

M Sakata, J Y Oh, K Cho, H Yasuda, M Todai, T Nakano, A Ikeda, M Ueda, M Takeyama,
Effects of Heat Treatment on Unique Layered Microstructure and Tensile Properties of TiAl Fabricated by Electron Beam Melting
Materials Science Forum, 941 (2018) 1366-1371.
dx.doi.org/10.4028/www.scientific.net/MSF.941.1366

論文

Microstructure and Fatigue Properties of TiAl with Unique Layered Microstructure Fabricated by Electron Beam Melting

K Cho, R Kobayashi, T Fukuoka, J Y Oh, H Yasuda, M Todai, T Nakano, A Ikeda, M Ueda, M Takeyama,
Microstructure and Fatigue Properties of TiAl with Unique Layered Microstructure Fabricated by Electron Beam Melting
Materials Science Forum, 941 (2018) 1597-1602.
dx.doi.org/10.4028/www.scientific.net/MSF.941.1597

論文

Influence of unique layered microstructure on fatigue properties of Ti-48Al-2Cr-2Nb alloys fabricated by electron beam melting

K Cho, R Kobayashi, J Y Oh, H Yasuda, M Todai, T Nakano, A Ikeda, M Ueda, M Takeyama
Influence of unique layered microstructure on fatigue properties of Ti-48Al-2Cr-2Nb alloys fabricated by electron beam melting
Intermetallics, 95 (2018) pp,1-10
dx.doi.org/10.1016/j.intermet.2018.01.009

論文

Strengthening of Mg-based long-period stacking ordered (LPSO) phase with deformation kink bands

K. Hagihara M. Yamasaki Y. Kawamura T. Nakano
Strengthening of Mg-based long-period stacking ordered (LPSO) phase with deformation kink bands
Materials Science & Engineering A 763 (2019) 138163; 1-9
dx.doi.org/10.1016/j.msea.2019.138163

論文

Effects of Fe on Microstructures and Mechanical Properties of Ti–15Nb–25Zr–(0, 2, 4, 8)Fe Alloys Prepared by Spark Plasma Sintering

Q. Li X. Yuan J. Li P. Wang M. Nakai M. Niinomi T. Nakano A. Chiba X. Liu D. Pan
Effects of Fe on Microstructures and Mechanical Properties of Ti–15Nb–25Zr–(0, 2, 4, 8)Fe Alloys Prepared by Spark Plasma Sintering
Materials Transactions, 60 [9] (2019), pp.1763-1768
dx.doi.org/10.2320/matertrans.ME201913

論文

Quantitative ultrasound (QUS) axial transmission method reflects anisotropy in micro-arrangement of apatite crystallites in human long bones: A study with 3-MHz-frequency ultrasound

T. Ishimoto R. Suetoshi D. Cretin K. Hagihara J. Hashimoto A. Kobayashi T. Nakano
Quantitative ultrasound (QUS) axial transmission method reflects anisotropy in micro-arrangement of apatite crystallites in human long bones: A study with 3-MHz-frequency ultrasound
Bone, 127(2019), pp.82-90
dx.doi.org/10.1016/j.bone.2019.05.034

論文

Quantitative and Qualitative Relationship between Microstructural Factors and Fatigue Lives under Load- and Strain-Controlled Conditions of Ti–5Al–2Sn–2Zr–4Cr–4Mo (Ti-17) Fabricated Using a 1500-ton Forging Simulator

M. Niinomi, T. Akahori, M. Nakai, Y. Koizumi, A. Chiba, T. Nakano, T. Kakeshita, Y. Yamabe-Mitarai, S. Kuroda, N. Motohashi, Y. Itsumi, T. Choda,
Quantitative and Qualitative Relationship between Microstructural Factors and Fatigue Lives under Load- and Strain-Controlled Conditions of Ti–5Al–2Sn–2Zr–4Cr–4Mo (Ti-17) Fabricated Using a 1500-ton Forging Simulator
Materials Transactions, 60 [9](2019), pp.1740-1748
dx.doi.org/10.2320/matertrans.ME201904

論文

Additive ManufacturingプロセスによるNi基超合金のクリープ特性向上に向けた異方性組織制御

岡田竜太朗野村嘉道井頭賢一郎中野貴由
Additive ManufacturingプロセスによるNi基超合金のクリープ特性向上に向けた異方性組織制御
スマートプロセス学会誌 8 [3] 5月号「Additive Manufacturingプロセスが切り開く革新的ハードマテリアルの開発（1）」,(2019),pp.106-111
dx.doi.org/10.7791/jspmee.8.106

論文

レーザ積層造形における雰囲気中の酸素がスパッタ発生に与える影響

天野宏紀, 佐々木智章, 野村祐司, 石本卓也,
レーザ積層造形における雰囲気中の酸素がスパッタ発生に与える影響
スマートプロセス学会誌、8 [3] 、5月号、「Additive Manufacturingプロセスが切り開く革新的ハードマテリアルの開発（1）」,(2019),pp.102-105
dx.doi.org/10.7791/jspmee.8.102

論文

Solidification microstructures of the ingots obtained by arc-melting and cold crucible levitation melting in an equiatomic TiNbTaZr medium-entropy alloy and TiNbTaZrX (X = V, Mo, W) high-entropy alloys

T. Nagase, K. Mizuuchi, T. Nakano,
Solidification microstructures of the ingots obtained by arc-melting and cold crucible levitation melting in an equiatomic TiNbTaZr medium-entropy alloy and TiNbTaZrX (X = V, Mo, W) high-entropy alloys
Entropy, 21[5](2019), pp.483: 1-17
dx.doi.org/10.3390/e21050483

論文

Beta titanium single crystal with bone-like elastic modulus and large crystallographic elastic anisotropy,

P. Wang, M. Todai, T. Nakano,
Beta titanium single crystal with bone-like elastic modulus and large crystallographic elastic anisotropy,
Journal of Alloys and Compounds, 782(2019), pp.1-17.
dx.doi.org/10.1016/j.jallcom.2018.12.236

論文

Diffusionless isothermal omega transformation in titanium alloys driven by quenched-in compositional uctuations,

M.Tane H.Nishiyama A.Umeda N.L.Okamoto K.Inoue M.Luckabauer Y.Nagai T.Sekino T.Nakano T.Ichitsubo
Diffusionless isothermal omega transformation in titanium alloys driven by quenched-in compositional uctuations,
Physical Review Materials, 3(2019), 043604:pp.1-9.
dx.doi.org/10.1103/PhysRevMaterials.3.043604

論文

Preparation of Titanium Alloy/Bioactive Glass Composite for Biomedical Applications via Selective Laser Melting

S. Lee, J. Y. Oh, S. Mukaeyama, S.-H. Sun, T. Nakano,
Preparation of Titanium Alloy/Bioactive Glass Composite for Biomedical Applications via Selective Laser Melting
Materials Transactions, 60 (2019), pp.1779-1784
dx.doi.org10.2320/matertrans.ME201914/

論文

Additive manufacturing of dense components in beta‑titanium alloys with crystallographic texture from a mixture of pure metallic element powders

T. Nagase, T. Hori, M. Todai, S.-H. Sun, T. Nakano,
Additive manufacturing of dense components in beta‑titanium alloys with crystallographic texture from a mixture of pure metallic element powders
Materials & Design, 173 (2019), 107771
dx.doi.org/10.1016/j.matdes.2019.107771

論文

レーザ積層造形法によるβ型Ti-15Mo-5Zr-3Al合金の集合組織形成

石本卓也, 安冨淳平, 杉本昌太, 中野貴由,
レーザ積層造形法によるβ型Ti-15Mo-5Zr-3Al合金の集合組織形成
スマートプロセス学会誌、7 [6], (2018), pp.229-232

dx.doi.org/10.7791/jspmee.7.229

論文

Neural network modelling on temperature coefficient of surface tension and its usage in melting point prediction of nanosized metal particles

J. Yeon P. Ni M. Nakamoto T. Tanaka
Neural network modelling on temperature coefficient of surface tension and its usage in melting point prediction of nanosized metal particles
Calphad, 64 (2019), 267-271
dx.doi.org/10.1016/j.calphad.2018.12.008

論文

ニューラルネットワークによる溶鉄中相互作用母係数の推算

中本将嗣田中敏宏
ニューラルネットワークによる溶鉄中相互作用母係数の推算
鉄と鋼vol. 105, No. 3（2019）, pp.395-399
dx.doi.org/10.2355/tetsutohagane.TETSU-2018-116