Top10%論文一覧 Top 10% papers

2026年(10 報)

  • K. Cho, K. Yamashita, S. Kakutani, T. Saito, T. Sasaki, K. Sawaizumi, M. Okugawa, Y. Koizumi, T. Mayama, T. Kikukawa, O. Gokcekaya, T. Ishimoto, H. Kimizuka, W. Gong, T. Kawasaki, S. Harjo, T. Nakano, H.Y. Yasuda. “Effect of nanoscale cellular structure on the mechanical properties of Inconel 718 with unique hierarchical structure fabricated by laser powder bed fusion”. Acta Materialia, Vol. 303, Art. No. 121696 (2026). 10.1016/j.actamat.2025.121696
  • S. Xie, M. Okada, H. Aoyagi, A. Otaka, X. Yang, T. Nakano, T. Matsumoto. “Robust adhesion between solid-state hydroxyapatite and bone tissue through surface demineralization”. Bioactive Materials, Vol. 57, pp. 632-645 (2026). 10.1016/j.bioactmat.2025.11.030
  • S. Lee, H. Asano, M. Sakurai, T. Nakano, T. Kasuga. “Preparation of Bifunctional Orthosilicophosphate MgO-CaO-ZnO-P2O5-SiO2 Glasses: In Vitro Evaluation of Antibacterial Activity and Osteoblast Gene Expression Behavior”. Advanced Healthcare Materials, Vol. 15, Issue 1, Art. No. e02546 (2026). 10.1002/adhm.202502546
  • C. Ozdogan, R.A. Yildiz, L. Tavares, O. Gokcekaya, M. Malekan. “Influence of heat treatment on microstructure and mixed-mode fracture behaviour of additively manufactured 316L stainless steel”. European Journal of Mechanics, A/Solids, Vol. 116, Art. No. 105949 (2026). 10.1016/j.euromechsol.2025.105949
  • M. Okugawa, Y. Furushiro, S. Motoyama, Y. Liu, T. Nakano, Y. Koizumi. “Integrated Computational and Experimental Study on Rapid Heating and Cooling Conditions in Powder-Bed Fusion of Al-Si Hypoeutectic Alloys”. Materials Transactions, Vol. 67, Issue 4, pp. 535-542 (2026). 10.2320/matertrans.MT-M2025132
  • Y. Küçük, O. Gokcekaya, A. Günen, M.S. Gök, A. Bahador, T. Nakano, G. Çam. “Microstructure control to enhance low temperature and cryogenic wear behavior of Inconel 718 produced by laser powder bed fusion”. Journal of Manufacturing Processes, Vol. 173, pp. 817-832 (2026). 10.1016/j.jmapro.2026.07.009
  • M. Okugawa, H. Yoshima, Y. Liu, P. Wang, Y. Koizumi, T. Nakano. “Single-track investigation of rapid solidification conditions of Hastelloy-X Ni-based superalloy in laser powder-bed fusion and applicability of columnar equiaxed transition criteria”. Virtual and Physical Prototyping, Vol. 21, Art. No. e2639906 (2026). 10.1080/17452759.2026.2639906
  • R. Ozasa, Y. Kizawa, K. Okawa, K. Hagihara, K. Sato, T. Matsumoto, T. Tokunaga, N. Ikeo, V. Srimaneepong, P. Wang, D.J. Jensen, T. Nakano. “Design of a novel scanning strategy for formation of extremely strong textures in hexagonal materials through laser powder bed fusion”. Materials and Design, Art. No. 116307 (2026). 10.1016/j.matdes.2026.116307
  • J.A. Lee, Y.W. Kim, T. Nakano, H. Joo, J.M. Park, H.S. Kim. “Data-selective machine learning framework (DSML) for defect-aware, interpretable yield-strength prediction for LPBF-fabricated AlSi10Mg alloys”. Acta Materialia, Art. No. 122101 (2026). 10.1016/j.actamat.2026.122101
  • K. Yamashita, K. Cho, T. Saito, T. Sasaki, K. Sawaizumi, M. Okugawa, Y. Koizumi, T. Nakano, H.Y. Yasuda. “Influence of Hierarchical Structure on Mechanical Properties of Additive Manufactured IN718 Alloys”. Materials Science Forum, Vol. 21, Art. No. e2639906 (2026). 10.4028/p-1D1HhB

2025年(12 報)

  • T. Ishimoto, N. Morita, R. Ozasa, A. Matsugaki, O. Gokcekaya, S. Higashino, M. Tane, T. Mayama, K. Cho, H.Y. Yasuda, M. Okugawa, Y. Koizumi, M. Yoshiya, D. Egusa, T. Sasaki, E. Abe, H. Kimizuka, N. Ikeo, T. Nakano. “Superimpositional design of crystallographic textures and macroscopic shapes via metal additive manufacturing—Game-change in component design”. Acta Materialia, Vol. 286, Art. No. 120709 (2025). 10.1016/j.actamat.2025.120709
  • H.-J. Kim, K. Mori, S. Ichikawa, T. Nakano, H. Yamashita. “Layered Na2Ti3O7-supported Ru catalyst for ambient CO2 methanation”. Nature Communications, Vol. 16, Issue 1, Art. No. 2697 (2025). 10.1038/s41467-025-57954-9
  • T. Rajabi, H.R. Ghorbani, M. Atapour, O. Gokcekaya, T. Nakano. “Investigating the controlled microstructure features and the corrosion performance of laser beam powder bed fusioned Ti6Al4V alloy”. Progress in Additive Manufacturing, Vol. 10, Issue 4, pp. 2519-2533 (2025). 10.1007/s40964-024-00765-z
  • Y.S. Kim, O. Gokcekaya, K. Sato, R. Ozasa, A. Matsugaki, T. Nakano. “In-situ alloying of nonequiatomic TiNbMoTaW refractory bio-high entropy alloy via laser powder bed fusion: Achieving suppressed microsegregation and texture formation”. Materials and Design, Vol. 252, Art. No. 113824 (2025). 10.1016/j.matdes.2025.113824
  • A. Bagherzadeh, O. Gokcekaya, E. Budak. “Directional-adaptive approach in machining of additively manufactured Inconel 718”. CIRP Annals, Vol. 74, Issue 1, pp. 81-85 (2025). 10.1016/j.cirp.2025.04.023
  • J.H. Lee, H. Kwon, G.H. Gu, J.Y. Lee, S.G. Jeong, E. Maawad, C. Ha, J. Wang, B.-J. Lee, S. Yi, T. Nakano, H.S. Kim. “Harnessing competitive interplay between precipitation and lattice distortion for strong and ductile medium-entropy alloy”. Materials Science and Engineering: A, Vol. 942, Art. No. 148642 (2025). 10.1016/j.msea.2025.148642
  • X. Wang, X. Qian, Y. Li, J. Liu, Y. Liu, M. Okugawa, Y. Koizumi, J. Liu, H. Xie, Y. Zou. “Synergistic enhancement of strength, corrosion resistance, and stress corrosion cracking resistance in WE43 Mg alloy via T6 treatment”. Corrosion Science, Vol. 255, Art. No. 113096 (2025). 10.1016/j.corsci.2025.113096
  • T. Ishikawa, F. Tanaka, F. Uehara, M. Tane. “Mesoscopic structure with high aspect ratio in PAN-based carbon fibers”. Carbon, Vol. 234, Art. No. 120032 (2025). 10.1016/j.carbon.2025.120032
  • S. Higashino, D. Miyashita, T. Ishimoto, E. Miyoshi, T. Nakano, M. Tane. “Low Young’s modulus in laser powder bed fusion processed Ti–15Mo–5Zr–3Al alloys achieved by the control of crystallographic texture combined with the retention of low-stability bcc structure”. Additive Manufacturing, Vol. 102, Art. No. 104720 (2025). 10.1016/j.addma.2025.104720
  • H.Y. Yasuda, Y. Yamada, M. Onishi, H. Suzuki, K. Cho, S. Ichikawa, T. Nagase. “Stress increase by nanoscale hcp precipitates in HfNbTaTiZr high entropy alloys”. Scripta Materialia, Vol. 255, Art. No. 116401 (2025). 10.1016/j.scriptamat.2024.116401
  • C. Wu, X. Zhao, T. Nakano, M. Niinomi, N. Jia, D. Zhang. “Grain size dependence of deformation behavior in Ti–15Mo alloy prepared by powder metallurgy”. Journal of Alloys and Compounds, Vol. 1010, Art. No. 177825 (2025). 10.1016/j.jallcom.2024.177825
  • T. Kikukawa, T. Ishimoto, H.S. Kim, T. Nakano. “Remarkable strengthening effects of cells in laser powder bed fusion-processed Inconel 718”. Materials Research Letters, Vol. 13, Issue 8, pp. 837-843 (2025). 10.1080/21663831.2025.2522801

2024年(9 報)

  • Z. Eren, O. Gokcekaya, D. Balkan, T. Nakano, Z. Mecitoğlu. “Comparison of in-plane compression of additively manufactured Ti6Al4V 2D auxetic structures: Lattice design, manufacturing speed, and failure mode”. Materials and Design, Vol. 241, Art. No. 112885 (2024). 10.1016/j.matdes.2024.112885
  • T. Mayama, T. Ishimoto, M. Tane, K. Cho, K. Manabe, D. Miyashita, S. Higashino, T. Kikukawa, H.Y. Yasuda, T. Nakano. “Novel strengthening mechanism of laser powder bed fusion-manufactured Inconel 718: Effects of customized hierarchical interfaces”. Additive Manufacturing, Vol. 93, Art. No. 104412 (2024). 10.1016/j.addma.2024.104412
  • F. Tanaka, T. Ishikawa, M. Tane. “A comprehensive review of the elastic constants of carbon fibers: implications for design and manufacturing of high-performance composite materials”. Advanced Composite Materials, Vol. 33, Issue 2, pp. 269-289 (2024). 10.1080/09243046.2023.2245210
  • T. Matsuzaka, A. Hyakubu, Y.S. Kim, A. Matsugaki, T. Nagase, T. Ishimoto, R. Ozasa, H.S. Kim, T. Mizuguchi, O. Gokcekaya, T. Nakano. “Development of an equiatomic octonary TiNbTaZrMoHfWCr super-high-entropy alloy for biomedical applications”. Materials Chemistry and Physics, Vol. 316, Art. No. 129120 (2024). 10.1016/j.matchemphys.2024.129120
  • S.-H. Park, O. Gokcekaya, M.-H. Oh, T. Nakano. “Effects of hatch spacing on densification, microstructural and mechanical properties of β-solidifying γ-TiAl alloy fabricated by laser powder bed fusion”. Materials Characterization, Vol. 214, Art. No. 114077 (2024). 10.1016/j.matchar.2024.114077
  • Y.S. Kim, R. Ozasa, K. Sato, O. Gokcekaya, T. Nakano. “Design and development of a novel non-equiatomic Ti-Nb-Mo-Ta-W refractory high entropy alloy with a single-phase body-centered cubic structure”. Scripta Materialia, Vol. 252, Art. No. 116260 (2024). 10.1016/j.scriptamat.2024.116260
  • M. Okugawa, K. Saito, H. Yoshima, K. Sawaizumi, S. Nomoto, M. Watanabe, T. Nakano, Y. Koizumi. “Solute segregation in a rapidly solidified Hastelloy-X Ni-based superalloy during laser powder bed fusion investigated by phase-field and computational thermal-fluid dynamics simulations”. Additive Manufacturing, Vol. 84, Art. No. 104079 (2024). 10.1016/j.addma.2024.104079
  • P.V. Cobbinah, S. Matsunaga, Y. Toda, R. Ozasa, M. Okugawa, T. Ishimoto, Y. Liu, Y. Koizumi, P. Wang, T. Nakano, Y. Yamabe-Mitarai. “Peculiar microstructural evolution and hardness variation depending on laser powder bed fusion-manufacturing condition in Ti–6Al–2Sn–4Zr–6Mo”. Smart Materials in Manufacturing, Vol. 2, Art. No. 100050 (2024). 10.1016/j.smmf.2024.100050
  • O. Gokcekaya, A. Günen, F. Ceritbinmez, A. Bahador, T. Nakano, M. Çetin. “Wire-EDM performance and surface integrity of Inconel 718 with unique microstructural features fabricated by laser powder bed fusion”. International Journal of Advanced Manufacturing Technology, Vol. 130, Issue 9-10, pp. 4513-4528 (2024). 10.1007/s00170-023-12924-7

2023年(8 報)

  • H. Amano, T. Ishimoto, K. Hagihara, R. Suganuma, K. Aiba, S.-H. Sun, P. Wang, T. Nakano. “Impact of gas flow direction on the crystallographic texture evolution in laser beam powder bed fusion”. Virtual and Physical Prototyping, Vol. 18, Issue 1, Art. No. e2169172 (2023). 10.1080/17452759.2023.2169172
  • O. Gokcekaya, T. Ishimoto, Y. Nishikawa, Y.S. Kim, A. Matsugaki, R. Ozasa, M. Weinmann, C. Schnitter, M. Stenzel, H.S. Kim, Y. Miyabayashi, T. Nakano. “Novel single crystalline-like non-equiatomic TiZrHfNbTaMo bio-high entropy alloy (BioHEA) developed by laser powder bed fusion”. Materials Research Letters, Vol. 11, Issue 4, pp. 274-280 (2023). 10.1080/21663831.2022.2147406
  • A. Nazir, O. Gokcekaya, K. Md Masum Billah, O. Ertugrul, J. Jiang, J. Sun, S. Hussain. “Multi-material additive manufacturing: A systematic review of design, properties, applications, challenges, and 3D printing of materials and cellular metamaterials”. Materials and Design, Vol. 226, Art. No. 111661 (2023). 10.1016/j.matdes.2023.111661
  • X. Zhao, R. Zhu, W. Song, L. Meng, M. Niinomi, T. Nakano, N. Jia, D. Zhang. “A strategy to regulate the yield ratio of a metastable high Zr-containing β titanium alloy: Synergistic effects of the β domain, β stability and β/α interfaces by varying the α phase content”. Journal of Alloys and Compounds, Vol. 952, Art. No. 170024 (2023). 10.1016/j.jallcom.2023.170024
  • K. Mori, T. Fujita, H. Hata, H.-J. Kim, T. Nakano, H. Yamashita. “Surface Chemical Engineering of a Metal 3D-Printed Flow Reactor Using a Metal-Organic Framework for Liquid-Phase Catalytic H2 Production from Hydrogen Storage Materials”. ACS Applied Materials and Interfaces, Vol. 15, Issue 44, pp. 51079-51088 (2023). 10.1021/acsami.3c10945
  • S. Hussain, A. Nazir, S. Waqar, U. Ali, O. Gokcekaya. “Effect of additive manufactured hybrid and functionally graded novel designed cellular lattice structures on mechanical and failure properties”. International Journal of Advanced Manufacturing Technology, Vol. 128, Issue 11-12, pp. 4873-4891 (2023). 10.1007/s00170-023-12201-7
  • K.M. Döleker, Y. Özgürlük, O. Gokcekaya, A. Günen, A. Erdoğan. “High-temperature corrosion and oxidation properties of borided CoCrFeNiAl0.5Nb0.5 HEA”. Surface and Coatings Technology, Vol. 470, Art. No. 129856 (2023). 10.1016/j.surfcoat.2023.129856
  • K. Sato, S. Takagi, S. Ichikawa, T. Ishimoto, T. Nakano. “Microstructure and Solute Segregation around the Melt-Pool Boundary of Orientation-Controlled 316L Austenitic Stainless Steel Produced by Laser Powder Bed Fusion”. Materials, Vol. 16, Issue 1, Art. No. 218 (2023). 10.3390/ma16010218

2022年(8 報)

  • K. Hagihara, T. Nakano. “Control of Anisotropic Crystallographic Texture in Powder Bed Fusion Additive Manufacturing of Metals and Ceramics—A Review”. JOM, Vol. 74, Issue 4, pp. 1760-1773 (2022). 10.1007/s11837-021-04966-7
  • D.E. Jodi, T. Kitashima, Y. Koizumi, T. Nakano, M. Watanabe. “Manufacturing single crystals of pure nickel via selective laser melting with a flat-top laser beam”. Additive Manufacturing Letters, Vol. 3, Art. No. 100066 (2022). 10.1016/j.addlet.2022.100066
  • R. Song, J. Han, M. Okugawa, R. Belosludov, T. Wada, J. Jiang, D. Wei, A. Kudo, Y. Tian, M. Chen, H. Kato. “Ultrafine nanoporous intermetallic catalysts by high-temperature liquid metal dealloying for electrochemical hydrogen production”. Nature Communications, Vol. 13, Issue 1, Art. No. 5157 (2022). 10.1038/s41467-022-32768-1
  • Y. Ekubaru, O. Gokcekaya, T. Ishimoto, K. Sato, K. Manabe, P. Wang, T. Nakano. “Excellent strength–ductility balance of Sc-Zr-modified Al–Mg alloy by tuning bimodal microstructure via hatch spacing in laser powder bed fusion”. Materials and Design, Vol. 221, Art. No. 110976 (2022). 10.1016/j.matdes.2022.110976
  • T. Todo, T. Ishimoto, O. Gokcekaya, J. Oh, T. Nakano. “Single crystalline-like crystallographic texture formation of pure tungsten through laser powder bed fusion”. Scripta Materialia, Vol. 206, Art. No. 114252 (2022). 10.1016/j.scriptamat.2021.114252
  • R. Hamai, S. Sakai, Y. Shiwaku, T. Anada, K. Tsuchiya, T. Ishimoto, T. Nakano, O. Suzuki. “Octacalcium phosphate crystals including a higher density dislocation improve its materials osteogenecity”. Applied Materials Today, Vol. 26, Art. No. 101279 (2022). 10.1016/j.apmt.2021.101279
  • M. Okugawa, Y. Ohigashi, Y. Furishiro, Y. Koizumi, T. Nakano. “Equiaxed grain formation by intrinsic heterogeneous nucleation via rapid heating and cooling in additive manufacturing of aluminum-silicon hypoeutectic alloy”. Journal of Alloys and Compounds, Vol. 919, Art. No. 165812 (2022). 10.1016/j.jallcom.2022.165812
  • M.J. Sagong, E.S. Kim, J.M. Park, G.M. Karthik, B.-J. Lee, J.-W. Cho, C.S. Lee, T. Nakano, H.S. Kim. “Interface characteristics and mechanical behavior of additively manufactured multi-material of stainless steel and Inconel”. Materials Science and Engineering: A, Vol. 847, Art. No. 143318 (2022). 10.1016/j.msea.2022.143318

2021年(18 報)

  • T. Ishimoto, R. Ozasa, K. Nakano, M. Weinmann, C. Schnitter, M. Stenzel, A. Matsugaki, T. Nagase, T. Matsuzaka, M. Todai, H.S. Kim, T. Nakano. “Development of TiNbTaZrMo bio-high entropy alloy (BioHEA) super-solid solution by selective laser melting, and its improved mechanical property and biocompatibility”. Scripta Materialia, Vol. 194, Art. No. 113658 (2021). 10.1016/j.scriptamat.2020.113658
  • O. Gokcekaya, T. Ishimoto, S. Hibino, J. Yasutomi, T. Narushima, T. Nakano. “Unique crystallographic texture formation in Inconel 718 by laser powder bed fusion and its effect on mechanical anisotropy”. Acta Materialia, Vol. 212, Art. No. 116876 (2021). 10.1016/j.actamat.2021.116876
  • T. Ishimoto, K. Hagihara, K. Hisamoto, T. Nakano. “Stability of crystallographic texture in laser powder bed fusion: Understanding the competition of crystal growth using a single crystalline seed”. Additive Manufacturing, Vol. 43, Art. No. 102004 (2021). 10.1016/j.addma.2021.102004
  • K. Hagihara, R. Ueyama, M. Yamasaki, Y. Kawamura, T. Nakano. “Surprising increase in yield stress of Mg single crystal using long-period stacking ordered nanoplates”. Acta Materialia, Vol. 209, Art. No. 116797 (2021). 10.1016/j.actamat.2021.116797
  • Y. Iijima, T. Nagase, A. Matsugaki, P. Wang, K. Ameyama, T. Nakano. “Design and development of Ti–Zr–Hf–Nb–Ta–Mo high-entropy alloys for metallic biomaterials”. Materials and Design, Vol. 202, Art. No. 109548 (2021). 10.1016/j.matdes.2021.109548
  • Y. Tsutsumi, T. Ishimoto, T. Oishi, T. Manaka, P. Chen, M. Ashida, K. Doi, H. Katayama, T. Hanawa, T. Nakano. “Crystallographic texture- and grain boundary density-independent improvement of corrosion resistance in austenitic 316L stainless steel fabricated via laser powder bed fusion”. Additive Manufacturing, Vol. 45, Art. No. 102066 (2021). 10.1016/j.addma.2021.102066
  • K. Cho, H. Kawabata, T. Hayashi, H.Y. Yasuda, H. Nakashima, M. Takeyama, T. Nakano. “Peculiar microstructural evolution and tensile properties of β-containing γ-TiAl alloys fabricated by electron beam melting”. Additive Manufacturing, Vol. 46, Art. No. 102091 (2021). 10.1016/j.addma.2021.102091
  • S.-H. Sun, K. Hagihara, T. Ishimoto, R. Suganuma, Y.-F. Xue, T. Nakano. “Comparison of microstructure, crystallographic texture, and mechanical properties in Ti–15Mo–5Zr–3Al alloys fabricated via electron and laser beam powder bed fusion technologies”. Additive Manufacturing, Vol. 47, Art. No. 102329 (2021). 10.1016/j.addma.2021.102329
  • H. Amano, T. Ishimoto, R. Suganuma, K. Aiba, S.-H. Sun, R. Ozasa, T. Nakano. “Effect of a helium gas atmosphere on the mechanical properties of Ti-6Al-4V alloy built with laser powder bed fusion: A comparative study with argon gas”. Additive Manufacturing, Vol. 48, Art. No. 102444 (2021). 10.1016/j.addma.2021.102444
  • S. Hibino, T. Todo, T. Ishimoto, O. Gokcekaya, Y. Koizumi, K. Igashira, T. Nakano. “Control of crystallographic texture and mechanical properties of hastelloy-X via laser powder bed fusion”. Crystals, Vol. 11, Issue 9, Art. No. 1064 (2021). 10.3390/cryst11091064
  • Y. Miyata, M. Okugawa, Y. Koizumi, T. Nakano. “Inverse columnar-equiaxed transition (CET) in 304 and 316l stainless steels melt by electron beam for additive manufacturing (AM)”. Crystals, Vol. 11, Issue 8, Art. No. 856 (2021). 10.3390/cryst11080856
  • H.Y. Yasuda, Y. Yamada, K. Cho, T. Nagase. “Deformation behavior of HfNbTaTiZr high entropy alloy singe crystals and polycrystals”. Materials Science and Engineering: A, Vol. 809, Art. No. 140983 (2021). 10.1016/j.msea.2021.140983
  • A. Takase, T. Ishimoto, R. Suganuma, T. Nakano. “Lattice distortion in selective laser melting (SLM)-manufactured unstable β-type Ti-15Mo-5Zr-3Al alloy analyzed by high-precision X-ray diffractometry”. Scripta Materialia, Vol. 201, Art. No. 113953 (2021). 10.1016/j.scriptamat.2021.113953
  • O. Gokcekaya, T. Ishimoto, T. Todo, P. Wang, T. Nakano. “Influence of powder characteristics on densification via crystallographic texture formation: Pure tungsten prepared by laser powder bed fusion”. Additive Manufacturing Letters, Vol. 1, Art. No. 100016 (2021). 10.1016/j.addlet.2021.100016
  • Q. Chen, Y. Zhao, S. Strayer, Y. Zhao, K. Aoyagi, Y. Koizumi, A. Chiba, W. Xiong, A.C. To. “Elucidating the effect of preheating temperature on melt pool morphology variation in Inconel 718 laser powder bed fusion via simulation and experiment”. Additive Manufacturing, Vol. 37, Art. No. 101642 (2021). 10.1016/j.addma.2020.101642
  • Y. Zhao, Y. Koizumi, K. Aoyagi, K. Yamanaka, A. Chiba. “Thermal properties of powder beds in energy absorption and heat transfer during additive manufacturing with electron beam”. Powder Technology, Vol. 381, pp. 573-582 (2021). 10.1016/j.powtec.2020.11.082
  • T. Ishimoto, K. Kawahara, A. Matsugaki, H. Kamioka, T. Nakano. “Quantitative Evaluation of Osteocyte Morphology and Bone Anisotropic Extracellular Matrix in Rat Femur”. Calcified Tissue International, Vol. 109, pp. 434-444 (2021). 10.1007/s00223-021-00852-1
  • H.Y. Yasuda, H. Miyamoto, T. Inagaki, K. Cho, T. Nagase. “Effect of chemical composition on grain refinement of AlxCoCrFeNi high entropy alloys with NiAl grain boundary precipitates”. Materials Science Forum, Vol. 1016, pp. 1690-1695 (2021). 10.4028/www.scientific.net/MSF.1016.1690

2020年(7 報)

  • T. Moriishi, R. Ozasa, T. Ishimoto, T. Nakano, T. Hasegawa, T. Miyazaki, W. Liu, R. Fukuyama, Y. Wang, H. Komori, X. Qin, N. Amizuka, T. Komori. “Osteocalcin is necessary for the alignment of apatite crystallites, but not glucose metabolism, testosterone synthesis, or muscle mass”. PLoS Genetics, Vol. 16, Issue 5, Art. No. e1008586 (2020). 10.1371/journal.pgen.1008586
  • K. Cho, R. Morioka, S. Harjo, T. Kawasaki, H.Y. Yasuda. “Study on formation mechanism of {332} deformation twinning in metastable β-type Ti alloy focusing on stress-induced α” martensite phase”. Scripta Materialia, Vol. 177, pp. 106-111 (2020). 10.1016/j.scriptamat.2019.10.011
  • T. Ishimoto, S. Wu, Y. Ito, S.-H. Sun, H. Amano, T. Nakano. “Crystallographic orientation control of 316L austenitic stainless steel via selective laser melting”. ISIJ International, Vol. 60, Issue 8, pp. 1758-1764 (2020). 10.2355/isijinternational.ISIJINT-2019-744
  • O. Gokcekaya, N. Hayashi, T. Ishimoto, K. Ueda, T. Narushima, T. Nakano. “Crystallographic orientation control of pure chromium via laser powder bed fusion and improved high temperature oxidation resistance”. Additive Manufacturing, Vol. 36, Art. No. 101624 (2020). 10.1016/j.addma.2020.101624
  • T. Nagase, Y. Iijima, A. Matsugaki, K. Ameyama, T. Nakano. “Design and fabrication of Ti–Zr-Hf-Cr-Mo and Ti–Zr-Hf-Co-Cr-Mo high-entropy alloys as metallic biomaterials”. Materials Science and Engineering C, Vol. 107, Art. No. 110322 (2020). 10.1016/j.msec.2019.110322
  • T. Wang, X. Qian, D. Yue, X. Yan, H. Yamashita, Y. Zhao. “CaMnO3 perovskite nanocrystals for efficient peroxydisulfate activation”. Chemical Engineering Journal, Vol. 398, Art. No. 125638 (2020). 10.1016/j.cej.2020.125638
  • Y. Shimono, M. Oba, S. Nomoto, Y. Koizumi, A. Chiba. “Numerical simulation of solidification in additive manufacturing of Ti alloy by multi-phase field method”. Journal of Japan Society of Powder and Powder Metallurgy, Vol. 67, No. 4, pp. 175-181 (2020).

2019年(12 報)

  • S.-H. Sun, T. Ishimoto, K. Hagihara, Y. Tsutsumi, T. Hanawa, T. Nakano. “Excellent mechanical and corrosion properties of austenitic stainless steel with a unique crystallographic lamellar microstructure via selective laser melting”. Scripta Materialia, Vol. 159, pp. 89-93. 10.1016/j.scriptamat.2018.09.017
  • D. Wei, X. Li, J. Jiang, W. Heng, Y. Koizumi, W.-M. Choi, B.-J. Lee, H.S. Kim, H. Kato, A. Chiba. “Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys”. Scripta Materialia, Vol. 165, pp. 39-43. 10.1016/j.scriptamat.2019.02.018
  • K. Hagihara, Z. Li, M. Yamasaki, Y. Kawamura, T. Nakano. “Strengthening mechanisms acting in extruded Mg-based long-period stacking ordered (LPSO)-phase alloys”. Acta Materialia, Vol. 163, pp. 226-239. 10.1016/j.actamat.2018.10.016
  • D. Wei, X. Li, W. Heng, Y. Koizumi, F. He, W.-M. Choi, B.-J. Lee, H.S. Kim, H. Kato, A. Chiba. “Novel Co-rich high entropy alloys with superior tensile properties”. Materials Research Letters, Vol. 7, No. 2, pp. 82-88. 10.1080/21663831.2018.1553803
  • T. Hori, T. Nagase, M. Todai, A. Matsugaki, T. Nakano. “Development of non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials”. Scripta Materialia, Vol. 172, pp. 83-87. 10.1016/j.scriptamat.2019.07.011
  • T. Fujieda, M. Chen, H. Shiratori, K. Kuwabara, K. Yamanaka, Y. Koizumi, A. Chiba, S. Watanabe. “Mechanical and corrosion properties of CoCrFeNiTi-based high-entropy alloy additive manufactured using selective laser melting”. Additive Manufacturing, Vol. 25, pp. 412-420. 10.1016/j.addma.2018.10.023
  • Y. Zhao, Y. Koizumi, K. Aoyagi, D. Wei, K. Yamanaka, A. Chiba. “Molten pool behavior and effect of fluid flow on solidification conditions in selective electron beam melting (SEBM) of a biomedical Co-Cr-Mo alloy”. Additive Manufacturing, Vol. 26, pp. 202-214. 10.1016/j.addma.2018.12.002
  • T. Nagase, T. Hori, M. Todai, S.-H. Sun, T. Nakano. “Additive manufacturing of dense components in beta‑titanium alloys with crystallographic texture from a mixture of pure metallic element powders”. Materials and Design, Vol. 173, Art. No. 107771. 10.1016/j.matdes.2019.107771
  • K. Hagihara, M. Yamasaki, Y. Kawamura, T. Nakano. “Strengthening of Mg-based long-period stacking ordered (LPSO) phase with deformation kink bands”. Materials Science and Engineering: A, Vol. 763, Art. No. 138163. 10.1016/j.msea.2019.138163
  • T. Nagase, K. Mizuuchi, T. Nakano. “Solidification microstructures of the ingots obtained by arc melting and cold crucible levitation melting in TiNbTaZr medium-entropy alloy and TiNbTaZrX (X = V, Mo, W) high-entropy alloys”. Entropy, Vol. 21, No. 5, Art. No. 483. 10.3390/e21050483
  • X. Ding, Y. Koizumi, D. Wei, A. Chiba. “Effect of process parameters on melt pool geometry and microstructure development for electron beam melting of IN718: A systematic single bead analysis study”. Additive Manufacturing, Vol. 25, pp. 176-189. 10.1016/j.addma.2018.12.018
  • D. Wei, A. Anniyaer, Y. Koizumi, K. Aoyagi, M. Nagasako, H. Kato, A. Chiba. “On microstructural homogenization and mechanical properties optimization of biomedical Co-Cr-Mo alloy additively manufactured by using electron beam melting”. Additive Manufacturing, Vol. 28, pp. 215-227. 10.1016/j.addma.2019.05.010

2018年(5 報)

  • S.-H. Sun, K. Hagihara, T. Nakano. “Effect of scanning strategy on texture formation in Ni-25 at.%Mo alloys fabricated by selective laser melting”. Materials and Design, Vol. 140, pp. 307-316. 10.1016/j.matdes.2017.11.060
  • K. Kuwabara, H. Shiratori, T. Fujieda, K. Yamanaka, Y. Koizumi, A. Chiba. “Mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy fabricated with selective electron beam melting”. Additive Manufacturing, Vol. 23, pp. 264-271. 10.1016/j.addma.2018.06.006
  • T. Nagase, M. Todai, T. Hori, T. Nakano. “Microstructure of equiatomic and non-equiatomic Ti-Nb-Ta-Zr-Mo high-entropy alloys for metallic biomaterials”. Journal of Alloys and Compounds, Vol. 753, pp. 412-421. 10.1016/j.jallcom.2018.04.082
  • S.-H. Sun, Y. Koizumi, T. Saito, K. Yamanaka, Y.-P. Li, Y. Cui, A. Chiba. “Electron beam additive manufacturing of Inconel 718 alloy rods: Impact of build direction on microstructure and high-temperature tensile properties”. Additive Manufacturing, Vol. 23, pp. 457-470. 10.1016/j.addma.2018.08.017
  • S. Kuttappan, D. Mathew, J.-I. Jo, R. Tanaka, D. Menon, T. Ishimoto, T. Nakano, S.V. Nair, M.B. Nair, Y. Tabata. “Dual release of growth factor from nanocomposite fibrous scaffold promotes vascularisation and bone regeneration in rat critical sized calvarial defect”. Acta Biomaterialia, Vol. 78, pp. 36-47. 10.1016/j.actbio.2018.07.050

2017年(10 報)

  • M. Todai, T. Nagase, T. Hori, A. Matsugaki, A. Sekita, T. Nakano. “Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials”. Scripta Materialia, Vol. 129, pp. 65-68. 10.1016/j.scriptamat.2016.10.028
  • T. Ishimoto, K. Hagihara, K. Hisamoto, S.-H. Sun, T. Nakano. “Crystallographic texture control of beta-type Ti–15Mo–5Zr–3Al alloy by selective laser melting for the development of novel implants with a biocompatible low Young's modulus”. Scripta Materialia, Vol. 132, pp. 34-38. 10.1016/j.scriptamat.2016.12.038
  • M. Todai, T. Nakano, T. Liu, H.Y. Yasuda, K. Hagihara, K. Cho, M. Ueda, M. Takeyama. “Effect of building direction on the microstructure and tensile properties of Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting”. Additive Manufacturing, Vol. 13, pp. 61-70. 10.1016/j.addma.2016.11.001
  • T. Fujieda, H. Shiratori, K. Kuwabara, M. Hirota, T. Kato, K. Yamanaka, Y. Koizumi, A. Chiba, S. Watanabe. “CoCrFeNiTi-based high-entropy alloy with superior tensile strength and corrosion resistance achieved by a combination of additive manufacturing using selective electron beam melting and solution treatment”. Materials Letters, Vol. 189, pp. 12-15. 10.1016/j.matlet.2016.11.026
  • H.Y. Yasuda, H. Miyamoto, K. Cho, T. Nagase. “Formation of ultrafine-grained microstructure in Al0.3CoCrFeNi high entropy alloys with grain boundary precipitates”. Materials Letters, Vol. 200, pp. 44-47. 10.1016/j.matlet.2017.04.072
  • Y. Cui, Y. Li, Z. Wang, X. Ding, Y. Koizumi, H. Bian, L. Lin, A. Chiba. “Impact of solute elements on detwinning in magnesium and its alloys”. International Journal of Plasticity, Vol. 91, pp. 120-136. 10.1016/j.ijplas.2016.09.014
  • D.-X. Wei, Y. Koizumi, M. Nagasako, A. Chiba. “Refinement of lamellar structures in Ti-Al alloy”. Acta Materialia, Vol. 125, pp. 81-97. 10.1016/j.actamat.2016.11.045
  • Y. Cui, Y. Li, Z. Wang, Q. Lei, Y. Koizumi, A. Chiba. “Regulating twin boundary mobility by annealing in magnesium and its alloys”. International Journal of Plasticity, Vol. 100, pp. 1-17. 10.1016/j.ijplas.2017.08.002
  • A. Sekita, A. Matsugaki, T. Nakano. “Disruption of collagen/apatite alignment impairs bone mechanical function in osteoblastic metastasis induced by prostate cancer”. Bone, Vol. 97, pp. 83-93. 10.1016/j.bone.2017.01.004
  • T. Nakano, H. Fukuda, H. Takahashi. “Development of a new powder/solid composite for biomimic implant materials by electron-beam additive manufacturing”. Key Engineering Materials, Vol. 879, pp. 1361-1365. 10.4028/www.scientific.net/MSF.879.1361

2016年(7 報)

  • H. Shiratori, T. Fujieda, K. Yamanaka, Y. Koizumi, K. Kuwabara, T. Kato, A. Chiba. “Relationship between the microstructure and mechanical properties of an equiatomic AlCoCrFeNi high-entropy alloy fabricated by selective electron beam melting”. Materials Science and Engineering: A, Vol. 656, pp. 39-46. 10.1016/j.msea.2016.01.019
  • K. Hagihara, M. Okubo, M. Yamasaki, T. Nakano. “Crystal-orientation-dependent corrosion behaviour of single crystals of a pure Mg and Mg-Al and Mg-Cu solid solutions”. Corrosion Science, Vol. 108, pp. 149-154. 10.1016/j.corsci.2016.03.019
  • K. Hagihara, T. Okamoto, H. Izuno, M. Yamasaki, M. Matsushita, T. Nakano, Y. Kawamura. “Plastic deformation behavior of 10H-type synchronized LPSO phase in a Mg-Zn-Y system”. Acta Materialia, Vol. 109, pp. 90-102. 10.1016/j.actamat.2016.02.037
  • F. Wang, Y. Li, X. Wang, Y. Koizumi, Y. Kenta, A. Chiba. “In-situ fabrication and characterization of ultrafine structured Cu-TiC composites with high strength and high conductivity by mechanical milling”. Journal of Alloys and Compounds, Vol. 657, pp. 122-132. 10.1016/j.jallcom.2015.10.061
  • P.F. Santos, M. Niinomi, H. Liu, K. Cho, M. Nakai, Y. Itoh, T. Narushima, M. Ikeda. “Fabrication of low-cost beta-type Ti-Mn alloys for biomedical applications by metal injection molding process and their mechanical properties”. Journal of the Mechanical Behavior of Biomedical Materials, Vol. 59, pp. 421-432. 10.1016/j.jmbbm.2016.02.035
  • T. Takashima, Y. Koizumi, Y. Li, K. Yamanaka, T. Saito, A. Chiba. “Effect of building position on phase distribution in Co-Cr-Mo alloy additive manufactured by electron-beam melting”. Materials Transactions, Vol. 57, No. 12, pp. 2041-2047. 10.2320/matertrans.Y-M2016826
  • A. Sekita, A. Matsugaki, T. Nakano. “Disruption of collagen matrix alignment in osteolytic bone metastasis induced by breast cancer”. Materials Transactions, Vol. 57, No. 12, pp. 2037-2040. 10.2320/matertrans.M2016341

ページの先頭へ戻る